solid rubber tire

1.How much range should the solid rubber tire pressure be maintained?

We attach importance to the innovation ability and team spirit of employees, have advanced R & D facilities and laboratories, and have a good quality management system. The tire pressure should be maintained within the range recommended by the vehicle manufacturer. This range is typically between 30 and 35 psi (pounds per square inch).

2.When do solid rubber tire need to be rebalanced?

We pay attention to employee development and benefits, and provide a good working environment in order to improve the efficiency of employees and improve the quality management of solid rubber tire products.
Tires should be rebalanced when they become unbalanced due to wear and tear. This can happen over time as the tire wears down, or if the tire is damaged or punctured. It is recommended to have your tires rebalanced every 6,000 to 8,000 miles.

3.What does the airtightness of a solid rubber tire mean?

We continue to invest in research and development and continue to launch innovative products. Airtightness of a tire refers to the ability of the tire to maintain its internal air pressure. A tire that is airtight will not lose air pressure over time, and will remain inflated and ready for use. A tire that is not airtight will slowly lose air pressure, resulting in a flat tire.

4.How to determine if a solid rubber tire needs to be replaced?

We should have a stable supply chain and logistics capabilities, and provide customers with high -quality, low -priced solid rubber tire products.
1. Check the tread depth. The tread depth should be at least 1/16 of an inch deep. If the tread depth is less than 1/16 of an inch, the tire should be replaced.
2. Check for signs of wear and tear. Look for signs of cracking, bulging, or uneven wear. If any of these signs are present, the tire should be replaced.
3. Check the sidewall for damage. Look for cuts, punctures, or other signs of damage. If any of these are present, the tire should be replaced.
4. Check the air pressure. The air pressure should be at the manufacturer’s recommended level. If the air pressure is too low, the tire should be replaced.

5.How strong is the grip of the solid rubber tire?

We maintain a stable growth through reasonable capital operations, focus on industry development trends and cutting -edge technologies, and focus on product quality and safety performance.
The strength of the grip of a tire depends on the type of tire and the conditions of the road. Generally, tires with a higher tread depth and softer rubber compounds will provide better grip on wet and slippery surfaces.

6.What is the solid rubber tire noise like?

We have been working hard to improve service quality and meet customer needs. Tire noise can vary depending on the type of tire and the road surface. Generally, tires make a low humming sound as they roll along the road. Some tires may make more noise than others, depending on the tread pattern and the type of rubber used.

7.What is tread depth and how does it affect solid rubber tire?

We have flexible production capacity. Whether you are large orders or small orders, you can produce and release goods in a timely manner to meet customer needs.
Tread depth is the measurement of the grooves in a tire's tread pattern. It is measured in 32nds of an inch and is an important factor in determining the life of a tire. The deeper the tread depth, the better the tire's ability to grip the road and disperse water, which helps to reduce the risk of hydroplaning. As the tread depth decreases, the tire's ability to grip the road and disperse water decreases, which can lead to decreased performance and increased risk of hydroplaning.

8.About solid rubber tire, do you test all your goods before delivery?

Yes, we have 100% test before delivery

9.How to determine if the solid rubber tire is installed correctly?

As one of the top solid rubber tire manufacturers in China, we take this very seriously.
1. Check the tire pressure. The tire pressure should be within the manufacturer's recommended range.
2. Check the tire tread. The tread should be even and the tread depth should be within the manufacturer's recommended range.
3. Check the wheel alignment. The wheel alignment should be within the manufacturer's recommended range.
4. Check the wheel balance. The wheel balance should be within the manufacturer's recommended range.
5. Check the wheel lug nuts. The wheel lug nuts should be tightened to the manufacturer's recommended torque.
6. Check the tire sidewall. The tire sidewall should be free of any cuts, bulges, or other damage.
7. Check the tire bead. The tire bead should be properly seated on the wheel rim.

10.How do solid rubber tire affect the handling performance of a vehicle?

We focus on our customers' needs and strive to meet their expectations, so we take this very seriously.
Tires have a major impact on the handling performance of a vehicle. The type of tire, tread pattern, and tire pressure all affect the vehicle's grip, cornering, and braking performance. Tires with a softer compound will provide better grip, while tires with a harder compound will provide better cornering and braking performance. The tread pattern of the tire also affects the handling performance, as tires with a more aggressive tread pattern will provide better grip in wet and slippery conditions. Finally, tire pressure affects the handling performance of a vehicle, as under-inflated tires will reduce the vehicle's grip and cornering performance, while over-inflated tires will reduce the vehicle's braking performance.

11.How to operate solid rubber tire replacement?

Our solid rubber tire products undergo strict quality control to ensure customer satisfaction.
1. Lift the vehicle with a jack and secure it with jack stands.
2. Remove the wheel cover or hubcap, if applicable.
3. Loosen the lug nuts with a lug wrench.
4. Raise the vehicle with the jack and remove the lug nuts.
5. Pull the wheel off the vehicle and set it aside.
6. Remove the old tire from the wheel.
7. Place the new tire on the wheel and secure it with the lug nuts.
8. Lower the vehicle and tighten the lug nuts with the lug wrench.
9. Replace the wheel cover or hubcap, if applicable.
10. Lower the vehicle and remove the jack stands.

12.Why are there differences in solid rubber tire prices?

We have the leading technology and innovation capabilities, and attach importance to employee training and development, and provide promotion opportunities.
Tire prices can vary for a variety of reasons, including the type of tire, the brand, the size, the quality, and the retailer. Different brands may use different materials or have different features, which can affect the price. The size of the tire can also affect the price, as larger tires tend to be more expensive. The quality of the tire can also affect the price, as higher-quality tires tend to be more expensive.
Finally, the retailer can also affect the price, as some retailers may offer discounts or promotions on certain tires.

13.How to deal with old solid rubber tire?

We have advanced production equipment and technology to meet the needs of customers, and can provide customers with high quality, low priced solid rubber tire products.
1. Recycle: Many tire retailers and auto shops offer tire recycling services. You can drop off your old tires and they will be recycled into new products such as playground surfaces, rubber mulch, and more.
2. Reuse: If your tires are still in good condition, you can donate them to a local charity or organization that can use them for projects.
3. Repurpose: Old tires can be repurposed into planters, furniture, and other creative projects.
4. Dispose: If your tires are too worn out to be reused or recycled, you can take them to a local landfill or hazardous waste facility for proper disposal.